Bobrick B-30919 Surface-Mtd Toilet Tissue, Seat-Cover Dispenser and Waste Disposal, Left

✅ Surface-Mounted — No wall recess required; surface-mounts to suitable partitions or walls

✅ 3-in-1 Unit — Toilet tissue, seat covers, and waste disposal in a single footprint

✅ Satin Stainless Steel — Type-304, corrosion-resistant, built for daily commercial use

✅ ADA Compliant — When installed per Bobrick placement guidelines

✅ Left-Hand Configuration — Tissue exits on the left; confirm stall layout before ordering

✅ Lead Time: 4–6 Weeks — Special order direct from Bobrick; plan accordingly or call us

✅ Low Price Guarantee — Bobrick Premier Partner pricing on every order

ADA-accessible toilet compartments have one of the tightest compliance checklists in any restroom: tissue within reach range, seat covers available, and a disposal unit that doesn't block the grab bar clearance. The Bobrick B-30919 solves all three in a single surface-mounted unit — no extra wall real estate, no juggling separate dispensers. It meets both federal ADA Standards and the 2019 California Building Code when installed per Bobrick's placement guidelines. As a Bobrick Premier Partner, Total Restroom carries the B-30919 with a Low Price Guarantee. Note: This item is special order with a 4–6 week lead time.

Designed Specifically for ADA Grab Bar Clearance

The B-30919 mounts flush against the side wall of an accessible stall with a minimum 1½" clearance below the grab bar — so it never interferes with the required wall spacing behind the bar. The tissue centerline falls 7"–9" in front of the toilet's leading edge, exactly where ADA Standards require it. This isn't a generic dispenser adapted to fit — it's engineered for the accessible compartment from the ground up.

Three Functions, One Footprint

Combining tissue, seat covers, and waste disposal into a single 4-1/4"-deep surface-mounted unit keeps accessible stalls uncluttered and compliant without multiple separate installations. Fewer penetrations in the wall, fewer service points, and a cleaner look — all from one SKU.

Type-304 Stainless Steel Construction

The skirt, flange, doors, and dispensers are all 18-8 Type-304 stainless steel — the same grade used in commercial kitchens and hospital environments. Welded construction with satin-finished exposed surfaces resists corrosion from daily cleaning chemicals and looks professional far longer than painted or powder-coated alternatives.

Self-Closing Disposal Panel

The waste compartment door is spring-loaded on a full-length stainless piano hinge with hemmed edges — it closes automatically after each use and won't be accidentally left open. The compartment features the standard Bobrick "drop here" symbol and holds a removable leak-proof polyethylene receptacle for easy service.

Keyed Security Across Your Facility

The tumbler lock on the seat-cover and waste compartments is keyed to match other Bobrick washroom accessories — meaning your maintenance team can use one key across all Bobrick hardware in the building. In high-traffic public facilities, that lock keeps supplies secure and prevents tampering.

Q: Is the Bobrick B-30919 ADA compliant?
A: Yes, when installed per Bobrick's placement guidelines. The unit is designed to meet ADA Standards for Accessible Design for toilet tissue dispensers in accessible stalls and the 2019 California Building Code — mounting flush to the side wall with clearance below the grab bar and positioning the tissue centerline 7"–9" in front of the toilet's leading edge as required.

Q: What's the lead time on the B-30919?
A: The B-30919 is a special-order item that ships direct from Bobrick with a 4–6 week lead time. If you're working on a project with a tight timeline, call us and we can check current availability or suggest an in-stock alternative.

Q: What's the difference between the B-30919 and the B-30929?
A: The only difference is the position of the toilet tissue spindle. The B-30919 has the tissue dispenser on the left side of the unit; the B-30929 has it on the right. Specify based on which wall the unit will mount to in your accessible stall — the tissue should be on the side nearest the toilet.

Q: What size waste liners or bags fit the disposal compartment?
A: The removable waste receptacle has a 0.5-gallon (1.9-L) capacity. Check current Bobrick accessories or contact us for the correct compatible liner SKU.

Q: Can this be installed on any restroom partition or wall?
A: The B-30919 is a surface-mount unit that does not require a wall recess or cutout. It works on metal, plastic laminate, solid phenolic, and drywall partitions. For drywall, locate studs or use appropriate anchors. Always coordinate placement to avoid pipes, vents, or conduit behind the wall.

Q: How does the B-30919 compare to buying three separate units?
A: The combination unit saves wall space, reduces installation time, and uses fewer wall penetrations than installing a tissue dispenser, seat-cover dispenser, and disposal separately. In an ADA accessible stall where clear floor space and reach range compliance are tight, a single 26⅝" wide unit is often the only practical option.

Q: Is a matte black version available?
A: Yes. The B-30919.MBLK is the same unit in a matte black finish for facilities with a black fixture design scheme. All specifications, dimensions, and compliance ratings are identical to the standard satin model.

MATERIALS:

Skirt — 18-8, Type-304, heavy-gauge stainless steel. Welded construction. Exposed surfaces have satin-finish.

Flange — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction.

Doors (2) — 18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin-finish. One-piece, seamless construction. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.

Toilet Tissue Dispensers (2) — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Equipped with two chrome-plated plastic spindles, each with a heavy-duty internal spring.

Disposal Panel — 18-8, Type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin-finish. Panel equipped with graphic symbol for waste "drop here". Secured to door with a spring-loaded, full-length stainless steel piano-hinge.

Waste Receptacle — Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.5-gal. (1.9-L.).