Home > Shop Products > Paper Towel Dispensers > Combination Paper Towel Dispensers
Combination Paper Towel Dispensers
- Authorized Stocking Distributor
- Everyday Low Price Guarantee
- Space-Saving Designs
- Quick Shipping On Top Brands
- Multiple Waste Capacities
- Touch-Free & Manual
Combination paper towel dispensers are available in countless mounting, dispensing and waste options. Shop top brands like Bobrick, Bradley, and ASI.
Why Choose a Combination Unit? One Wall Mount. Two Problems Solved.
Separate dispensers and waste bins work — but combination units reduce install labor, cut cleaning time, keep waste right where it belongs, and produce a coordinated look that standalone units can't match.
One Installation, Not Two
Combination units put paper towel dispensing and waste collection in one fixture. Recessed and semi-recessed models can help save installation time on new construction and remodel projects.
Faster Servicing Cycles
Custodial staff restocks towels and empties the waste bin in one stop. In busy facilities, that's a meaningful reduction in labor per restroom per shift.
Specification-Ready
Bobrick, Bradley, and ASI combination units are standard spec in commercial construction — recognized in CSI Division 10, fully documented for architects, and available with project pricing.
Towels Land Where They Belong
With the waste bin positioned directly beneath the dispenser slot, used towels drop in immediately — less litter on the floor between service visits, and less slip-and-fall liability.
Tamper-Resistant Construction
Many models include keyed locking cabinets for controlled access — important in public and semi-public facilities. Check individual model specs to confirm locking features.
Touchless Options Available
Automatic sensor-dispensing models eliminate hand-to-surface contact entirely — the standard in healthcare, food service, and high-hygiene commercial environments.
Fully Recessed
Flush to wall — cleanest look
The unit installs into a wall cutout so only the face plate is exposed. Cleanest, most professional appearance. Typically requires 3¾"–6" of wall cavity depth.
Best for: New construction, major renovations, healthcare, hospitality. Any facility where aesthetics and vandal-resistance are priorities.
Install req: Requires in-wall depth — confirm stud spacing and cavity clearance before specifying.
Top models:
Surface-Mounted
No wall cutout required
Mounts directly to the wall face — no cutting required. Fastest install, works on any wall type including tile, CMU, and masonry. Protrudes 4–9" from the wall surface.
Best for: Retrofits, tile or concrete walls, rental properties, or any install where cutting isn't feasible.
Install req: No wall cutting needed — anchor to wall studs or use appropriate masonry anchors.
Top models:
Semi-Recessed
Partial recess — best of both
Partially recessed into the wall — typically requires 2–2.5" of depth. Less protrusion than surface-mount, less cutting than full recess. Good compromise for retrofit situations.
Best for: Existing buildings with some cavity depth, where full recess isn't possible but aesthetics still matter.
Install req: Requires partial wall recess — verify available depth before ordering.
Top models:
Touchless / Automatic
No-contact dispensing
Sensor-activated dispensing eliminates hand-to-surface contact. Increasingly standard in commercial facilities — required in many healthcare and food service environments.
Best for: Hospitals, clinics, food service, schools, and any facility with hands-free or infection-control requirements.
Install req: Requires power — battery or hardwired 120V depending on model. Confirm before rough-in.
Top models:
Quick Selection Guide: Mounting Styles And Feature Options
| Mounting Type | Best For | Install Requirement | Main Benefit |
|---|---|---|---|
| Fully Recessed | New Construction Or Major Remodels | Requires In-Wall Depth | Cleanest Built-In Look |
| Semi-Recessed | Retrofits With Limited Wall Depth | Requires Partial Recess | Balance Of Appearance And Easier Install |
| Surface-Mounted | Existing Finished Walls | No Wall Cutting Needed | Fastest, Simplest Installation |
| Touchless Models | Healthcare, Food Service, High-Hygiene Spaces | Varies By Model | Hands-Free Operation |
| High-Capacity Models | Airports, Schools, Arenas, Busy Facilities | Varies By Model | Less Frequent Servicing |
Frequently Asked Questions
Q: What's the difference between a combination unit and buying a separate dispenser and waste receptacle?
A: A combination unit integrates both into a single chassis with one wall opening. You cut once, install once, and service one unit per stop. Separate components require two cutouts and two service points. Combination units also position the waste bin directly below the dispenser, which dramatically reduces floor litter compared to a freestanding waste bin across the room.
Q: Can I retrofit a fully recessed combination unit into an existing restroom?
A: Yes — but verify your wall cavity depth first. Standard 2×4 stud walls (with ½″ drywall on each face) provide about 3½″ of clear depth. Slim-profile models like the Bobrick TrimLineSeries require as little as 4⅛″. If your cavity is shallower than the unit's rough-in depth, a semi-recessed or surface-mount model is the practical solution for your retrofit.
Q: What towel formats do combination units accept — and does it matter which I choose?
A: Most combination units accept C-fold or multi-fold towels; many also support center-pull or stub roll formats. Roll towel dispensers typically hold more towels per loading, reducing restocking frequency — a meaningful operational advantage in high-traffic facilities. Confirm the towel format for any model before ordering so your janitorial supply and the dispenser match.
Q: Are these units ADA compliant?
A. Many of these units can be used in an ADA-compliant restroom, but ADA compliance depends on the model and how it is installed. Key factors include mounting height, reach range, and wall projection. Always check the product specifications and installation conditions for your project.
Which Paper Towels Work With These Units?
Not all combination units accept all towel formats. Match your unit to your supply chain — or choose the unit based on the towel format that's most operationally efficient for your facility.

Wide Compatibility
C-Fold
The most widely stocked commercial towel format. Compatible with most Bobrick ClassicSeries, TrimLineSeries, and ASI Traditional combination units. If your janitorial supply is already standardized on C-fold, this is the easiest path.

Wide Compatibility
Multifold / Z-Fold
Higher per-load capacity than C-fold in the same chamber. Compatible with most of the same units that accept C-fold — capacity is typically listed for both formats on the spec sheet. Good choice for reducing restocking frequency.

Select Models Only
Roll Towel
Available on convertible and roll-specific models only — including Bobrick B-39747, B-39619, and B-3979. Roll dispensing reduces per-use waste and requires less frequent restocking, making it preferred for high-traffic environments. Not compatible with standard folded-towel units.










