Toilet Paper
Dispensers

Mounting Types

Mounting type affects installation cost, appearance, and which wall conditions will work best.

Most Common

Surface Mounted

Mounts directly to the wall face with no wall cavity required. A practical choice for retrofits, partition panels, and most commercial restrooms.

• No rough opening required
• Works on many wall and partition types
• Easy to relocate or replace
• Lowest installed cost

Best for: Partition installs, retrofits, most commercial stalls

Cleanest Look

Recessed

Built into the wall cavity for a flush appearance. Often specified in new construction and higher-end projects.

• Flush appearance
• Reduced projection from wall
• Can help with accessible layouts
• More permanent installation

Best for: New construction, healthcare, high-end commercial projects

High Capacity

Partition Mounted

Designed for select multi-stall layouts where one unit can serve adjacent stalls through the partition.

• Can serve two adjacent stalls
• Helps reduce fixture count
• Useful in some high-traffic layouts
• Best for specific partition applications

Best for: Multi-stall rows in schools, public buildings, some office layouts

Space Saver

Semi-Recessed

Partially recessed into the wall for less projection than surface-mounted models. A middle-ground option when full recessing is not practical.

• Less projection than surface mount
• Shallower rough opening than full recessed
• Cleaner look than surface mount
• Helpful in some space-sensitive layouts

Best for: Remodels, limited wall depth, some ADA-sensitive layouts

Match the Dispenser to Your Traffic Volume

The most common restroom complaint is running out of paper. Use this guide to size correctly for your facility type.

Low Traffic

Office & Small Retail

Under 50 uses/day per stall

✅ Single Standard Roll

Single-roll holders with standard toilet tissue are often sufficient for low-traffic restrooms. Simple, easy-to-refill dispensers work well where restocking is frequent and theft risk is low.

Moderate Traffic

Restaurant, Healthcare Clinic

50–200 uses/day per stall

✅ Single Jumbo Roll (10")

A single jumbo-roll dispenser, such as Bobrick B-2890, holds one 10” roll and helps reduce refill frequency versus standard-roll dispensers.

High Traffic

School, Government, Big Box

200–500 uses/day per stall

✅ Twin Jumbo Roll

Twin jumbo-roll dispensers, such as Bobrick B-2892, hold two 10” rolls and expose one roll at a time, helping maintain supply and reduce unnecessary access to the reserve roll.

Very High Traffic

Stadium, Airport, Transit Hub

500+ uses/day per stall

✅ Twin Jumbo + Smart Sensor

For very high-traffic restrooms, pairing a twin jumbo-roll dispenser with a monitoring sensor can help staff service restrooms before product runs out. Bobrick’s B-SM-2892 combines the B-2892 with a short-range IoT sensor.

One dispenser per stall is the standard. If your stalls experience frequent run-outs, upgrade to a higher-capacity dispenser rather than adding a second unit — it's cheaper to buy one jumbo dispenser than two standard-roll units, and requires fewer refills.

ADA Compliance — What You Need to Know

ADA Standards for Accessible Design §604.7 sets specific requirements for toilet tissue dispensers in accessible stalls. This is general guidance only. Always verify final layout and mounting with applicable codes and your project professional.

Common Questions About Commercial Toilet Paper Dispensers

Q: What Is The Difference Between A Jumbo Roll And A Standard Roll Toilet Paper Dispenser?
Standard-roll dispensers are designed for smaller rolls and are common in lower-traffic restrooms. Jumbo-roll dispensers hold much larger rolls, which helps reduce refill frequency in busier restrooms. Twin jumbo dispensers add a reserve roll, making them a strong choice for high-traffic facilities.

Q: Do Commercial Toilet Paper Dispensers Need To Be ADA Compliant?
Toilet tissue dispensers in accessible stalls must be selected and installed to meet ADA requirements. Key factors include continuous paper flow, proper outlet height, and correct location relative to the toilet. Always verify final layout with applicable state and local codes.

Q: Should I Choose A Surface-Mounted Or Recessed Toilet Paper Dispenser?
Surface-mounted dispensers are easier to install and are often the best choice for retrofit projects. Recessed dispensers offer a more built-in appearance and can make it easier to maintain clear space in some layouts. The right choice depends on your wall construction, budget, and project type.

Q: How Many Toilet Paper Dispensers Do I Need Per Stall?
In most layouts, one dispenser per stall is typical. In higher-traffic restrooms, a twin jumbo dispenser is often a better solution than adding a second unit because it increases capacity without complicating the layout.

Q: Are Bobrick Dispensers Worth It Over Cheaper Plastic Alternatives?
For many commercial installations, stainless steel dispensers are worth the upgrade because they are generally more durable, more vandal-resistant, and better suited to heavy daily use. Lower-cost plastic dispensers may work in light-duty settings, but commercial facilities often prefer more durable models for longer service life.

Q: What Size Toilet Paper Rolls Fit Commercial Dispensers?
Roll compatibility depends on the dispenser type and model. Standard-roll dispensers are made for smaller rolls, while jumbo-roll dispensers accept larger rolls. Always verify the dispenser’s maximum roll diameter and required core size before purchasing paper.